Aim: The adjustment and transfer of a stable occlusion can be a major challenge in prosthetic rehabilitations. The aim of this study was to assess a non-invasive treatment option for complex prosthetic rehabilitations and occlusal analyses using 3D-printed restorations clinically. Materials and Methods: Eleven patients received a partial or complete rehabilitation with the aid of 3D-printed restorations (n=171). After 12 months of clinical service, all restorations were analyzed using the United States Public Health Service (USPHS) criteria. Results: The 12-month clinical data revealed that 3D-printed restorations showed a survival rate of 84.4%. Complications occurred mostly regarding the anatomical form (7%) or marginal integrity (6AC%) and were consequently rated “Charlie” or “Delta.” Color stability and color match of 3D-printed restorations were rated “Alpha” in 83% and 73%, respectively, of all restorations. Marginal inflammation was rated “Alpha” in 89% of all restorations. An excellent surface texture and no secondary caries or postoperative sensitivities (100%) were observed. Conclusions: 3D-printed restorations might be an alternative treatment option for initiating complex prosthetic rehabilitations. Technical complications rarely occurred. Biological complications did not occur at all. The color stability showed promising results after 12 months of clinical service. However, the results should be interpreted with caution. Long-term results with a high number of restorations should be awaited. Palabras clave: 3D-printing, additive manufacturing, CAD/CAM, color stability, in vivo, wear behavior

Objectives: Addressing a single-tooth gap in the anterior region, resulting from aplasia or trauma, poses both esthetic and functional challenges. This case report presents the restoration of a young adult with a cleft, exhibiting anterior hypoplasia and aplasia in the canine and incisor regions, using all-ceramic cantilever resin-bonded fixed dental prostheses. Method and materials: After verification of esthetic and functional considerations through a diagnostic wax-up and an intraoral mock-up, three anterior all-ceramic cantilever resin-bonded fixed dental prostheses made of veneered zirconium dioxide were planned in the region of the maxillary right lateral incisor and maxillary left canine. The impression was made with an intraoral scanner. The framework fit was evaluated. Glaze firing and full adhesive cementation under rubber dam followed. Results: The final restoration met the patients’ expectations and restored facial esthetics and function. Conclusions: All-ceramic cantilever resin-bonded fixed dental prostheses offer a promising minimally invasive therapeutic option for cleft patients. Palabras clave: aplasia, cantilever, cleft of lip and palate, prosthodontics, resin-bonded fixed dental prosthesis (RBFDP), veneered zirconium dioxide

Einführung: Die Rekonstruktion generalisierter Zahnhartsubstanzdefekte stellt eine therapeutische Herausforderung dar. Vor mehr als zehn Jahren wurden Konzepte auf der Basis von noninvasiven Vorgehensweisen veröffentlicht. Die aufwendige Vorgehensweise verhinderte einen flächendeckenden Einsatz. Die additive Fertigung eröffnet dafür neue Chancen. In einer klinischen Untersuchung wird die Bewährung gedruckter Aufbisse aus Hybridmaterial validiert. Exemplarisch für diese Studie wird im Folgenden ein Patientenfall erläutert. Behandlungsmethode: Im dargestellten Patientenfall bestand die Problematik eines generalisierten, ausgeprägten Erosionsgebisses. Die Rekonstruktion basierte auf einem volldigitalen Workflow und führte zu 27 gedruckten Aufbissen im Non-prep-Design aus einem Hybridmaterial. Nach Eingliederung erfolgten eine Farbbestimmung mittels Spektralfotometers sowie ein Intraoralscan zur Beurteilung des Verschleißverhaltens. Beide Maßnahmen wurden nach sechs, zwölf, 24 und 36 Monaten wiederholt. Ergebnisse: Nach zwölf Monaten Tragezeit wurden ein durchschnittlicher Materialverschleiß von 0,09 mm und eine Farbveränderung von ΔE = 6,3 ± 2,3 ermittelt. Zudem kam es zu drei Abplatzungen. Schlussfolgerung: Das Patientenbeispiel zeigte die Verwendung gedruckter Hybridmaterialien als noninvasive Therapiemaßnahme. Eine schnelle Verbesserung der Ästhetik, verbunden mit einer Bisshebung, wurde ohne eine langwierige Vorbehandlung mittels Bisshebungsschiene erreicht. Zur weiteren Beurteilung der Behandlungsoption müssen die Ergebnisse einer größeren Kohorte über einen längeren Zeitraum abgewartet werden. Palabras clave: 3D-Druck, Abrasion, additive Fertigung, Bisshebung, CAD/CAM, Erosion

Aim: The aim of the present study was to evaluate the long-term clinical survival and success rate of veneered zirconia crowns with a modified anatomical framework design after 10 years in function. Materials and methods: In total, 36 zirconia crowns were fabricated for 28 patients. An anatomically modified framework design was developed. Crowns were inserted between 2008 and 2009. A follow-up of 19 patients with 28 crowns was conducted in 2020 to document mechanical and biologic parameters. Additionally, a modified version of the pink esthetic score (PES) was documented. Patient satisfaction was assessed using United States Public Health Service (USPHS) criteria. The success and survival rates were calculated using the Kaplan-Meier analysis. Results: After more than 10 years of clinical service, the survival rate of the zirconia crowns was 92.9%. Biologic complications occurred in 12% of the examined crowns, whereas technical complications occurred in 54%. Mostly, chippings (50%) and insufficient marginal gaps (50%) were observed. Most crowns were positively evaluated for more than one technical complication. Periodontal conditions with probing depths of up to 3 mm were comparable with measured values before crown delivery (73% to 75%). Most of the crowns had modified PES values of 10 or higher. Patient satisfaction was high. Conclusions: The modified framework design led to a high survival rate of the crowns but a relatively low success rate. High patient satisfaction and inconspicuous periodontal conditions were demonstrated. Biologic complications occurred far less frequently than technical complications. Palabras clave: all-ceramic crown, framework design, clinical study, chipping, complications

The treatment management of patients with hemifacial microsomia (HM) includes both surgical and nonsurgical approaches and depends primarily on the degree of deformity of the facial and skeletal structures. In this context, the combined efforts of the maxillofacial surgeon, the orthodontist, and the prosthodontist are essential for a satisfactory functional and esthetic outcome. Case presentation: A 31-year-old man presented with a chief complaint of facial asymmetry. The patient had been diagnosed with HM on the right side, with severe external ear deformity, and hypoplasia of the facial muscles and the zygomatic bone. The intraoral examination showed a Class I molar and canine relationship with a reduced horizontal overlap and an occlusal plane canting. The maxillary anterior teeth were severely worn due to traumatic occlusion. Orthodontic treatment in conjunction with combined orthognathic surgery was planned to address the facial asymmetry. Ramus distraction osteogenesis was carried out, followed by conventional presurgical orthodontic treatment. The treatment was completed by prosthetic rehabilitation for the reconstruction of the maxillary teeth and fine occlusal adjustment. Conclusion: The cooperation between the orthodontist, surgeon, and prosthodontist becomes indispensable when treating complex cases of HM. An interdisciplinary approach should be adopted from the start of treatment, promoting integrated customized care. Palabras clave: functional rehabilitation, hemifacial microsomia, interdisciplinary treatment, orthodontics, prosthodontics

Durch die Weiterentwicklung der additiven Fertigung in der Zahnmedizin können heute ästhetisch ansprechende, kostengünstige Einzelzahnrestaurationen schnell und ressourcenschonend hergestellt werden. Der vollständig digitale Behandlungsablauf wird in diesem Fallbericht erläutert. Palabras clave: CAD/CAM, additive Fertigung, 3-D-Druck, digitaler Workflow, Intraoralscan

Peri-implantitis is a plaque-associated pathological disease occurring in tissues surrounding dental implants. It is characterized by an inflamed peri-implant mucosa and resulting progressive loss of peri-implant supporting bone. Prosthodontic etiologic factors such as hygiene-incompetent prosthetic designs or residual cement seem to favor the development of peri-implantitis. During the course of the article, several characteristics of prosthetic superstructures are presented and their relevance in relation to peri-implant inflammation is discussed. Palabras clave: implants, peri-implantitis, prosthetic, superstructure

Die Periimplantitis ist eine plaqueassoziierte pathologische Erkrankung, die in Geweben um Zahnimplantate auftritt. Sie ist durch eine entzündete periimplantäre Mukosa und einen daraufhin fortschreitenden Verlust von periimplantären Stützknochen gekennzeichnet. Prothetisch ätiologische Faktoren wie hygieneunfähige Zahnersatzgestaltungen oder verbliebene Zementreste scheinen die Entstehung einer Periimplantitis zu begünstigen. Im Verlauf des Artikels werden mehrere Merkmale prothetischer Suprakonstruktionen vorgestellt und ihre Bedeutung im Zusammenhang mit periimplantären Entzündungen wird diskutiert. Palabras clave: Implantate, Periimplantitis, Prothetik, Suprakonstruktion

The majority of complete dentures are not initially made for the rehabilitation of an edentulous jaw; in most cases, they replace an existing complete denture. Since the ability to adapt to a new complete denture decreases with age, the replica denture procedure represents a smart opportunity. The aim is to copy the clinically successful parts of the old prosthesis and to change the destroyed parts. There are many advantages of this technique, including increased patient acceptance, especially among older people who may not be able to adapt easily to a new prosthesis. The advantages of digital technology are very apparent in the creation of a replica prosthesis. Various cases are presented in the present article to illustrate the procedure and the advantages of this technique using the example of computer-aided fabrication with the Baltic Denture System. Palabras clave: CAD/CAM, complete dentures, milled prosthesis, replica denture

Die Digitalisierung ist aus vielen Bereichen der Zahnmedizin nicht mehr wegzudenken. Dieser Trend wird sich voraussichtlich auch in den kommenden Jahren fortsetzen. Mit Blick auf die Implantologie ermöglichen die digitalen Techniken ein hohes Maß an Genauigkeit. Sie sorgen damit für mehr Sicherheit und vorhersagbare prothetische Ergebnisse. Diese Vorteile kommen sowohl den Behandlern als auch den Patienten zugute und ermöglichen neue klinische Konzepte. Trotz allem macht die Digitalisierung nicht alles einfacher und schneller. Sie erfordert viel mehr ein umfangreiches Wissen des Implantologen im Bereich der zahnärztlichen Prothetik und Chirurgie. Manuskripteingang: 31.05.2021, Annahme: 20.08.2021 Palabras clave: Implantate, Implantatprothetik, Backward-Planning, CAD/CAM, digitaler Workflow