The International Journal of Oral & Maxillofacial Implants, 03/2024

Data collection is a fundamental process in any scientific investigation. This article outlines best practices for three general elements of the data-collection process: (1) determining the specific aim, (2) design, and (3) documentation. We discuss these elements in the style of a tutorial, using extended examples specific to dental research. Each section of the tutorial concludes with a bullet-point summary for ease of reference to the readers. The supplemental material for this article includes templates designed to assist dental researchers in initiating the data-collection process in their respective research efforts, and selected references are organized by topic. Although written for an audience of clinical scientists in dentistry, the principles outlined here could be generalized to other health science research contexts. 

Purpose: The aim of the present study was to compare the histomorphometrically evaluated new bone formation (NB), the radiographically measured graft stability, and the clinical implant outcome for maxillary sinus augmentation grafted with deproteinized bovine bone mineral (DBBM) with either small (Bio-Oss-S, Geistlich) or large (Bio-Oss-L, Geistlich) particles. Materials and Methods: Using a split-mouth study design, bilateral maxillary sinus augmentation was performed in 13 patients either with Bio-Oss-S particles (0.25 to 1 mm) or Bio-Oss-L particles (1 to 2 mm). After a healing period of 6 months, bone biopsies were axially retrieved in the molar region for histologic/histomorphometric analysis of NB, including subsequent staged implant placement. To determine graft stability, the maxillary sinus augmentation vertical graft heights were radiographically measured immediately after sinus augmentation, at implant placement, and at the 2- and 4-year post-augmentation follow-ups. In addition, the clinical implant-prosthodontic outcome (survival/ success/marginal bone loss) was assessed at 1 and 3 years post-loading. Results: A total of 22 sinuses from 11 patients with split-mouth evaluation were ultimately available for data and statistical analysis. Histomorphometric analysis of the axially retrieved bone biopsies revealed the presence of NB (S: 25.5% ± 7.0% vs L: 23.6% ± 11.9%; P = .640), residual graft particles (S: 19.6% ± 9.2% vs L: 17.5% ± 6.3%; P = .365) as well as connective tissue (S: 54.9% ± 9.2% vs L: 58.9% ± 12.5%; P = .283), without significant differences between the use of small (Bio-Oss-S) and large (Bio-Oss-L) particles. However, there was significantly (P = .021) higher bone-to-graft contact (BGC) for the small-particle graft sites (27.9% ± 14.8%) compared to the large-particle graft sites (19.9% ± 12.9%), representing a significantly higher osteoconductivity. Both particle sizes showed significant (P < .01) vertical graft height reduction over time (4 years) of about 10%, with predominant graft reduction in the time period between sinus augmentation and implant placement compared to any follow-up periods after implant placement. At the 3-year post-loading implant evaluation, all implants and prostheses survived (100%), and the peri-implant marginal bone loss (S: 0.52 ± 0.19 mm; L: 0.48 ± 0.15 mm) as well as the peri-implant health conditions (S: 87.5%, L:81.2%) did not differ between implants inserted with the two different xenograft particles used. Conclusions: The use of small and large bovine xenograft particles for maxillary sinus augmentation provides for comparable bone formation, ensuring stable graft dimensions combined with high implant success and healthy peri-implant conditions. However, small particle size resulted in a higher BGC, providing for higher osteoconductivity than with the larger particle size.

Purpose: To answer the following focus question: In preclinical in vivo experimental models, do oral implants placed in overdimensioned (OD) sites present greater biomechanical properties and histomorphometric parameters of osseointegration compared to implants placed in standard or undersized implant sockets? Materials and Methods: Online databases were searched for controlled animal studies reporting on OD sites up to February 2023. The relative implant– final drill discrepancy (IDD) was used to categorize the control and test groups according to surgical drilling protocol: (1) control: undersized (IDD > 0.5 mm) or standard (IDD = 0.2 to 0.5 mm); and (2) test OD: stress-free oversized (IDD = 0.0 to –0.1 mm); test GAP: friction-free oversized (IDD ≤ –0.1 mm). Random-effects meta-analyses were performed for the outcomes of insertion and removal torque values (ITV and RTV, respectively), bone-to-implant contact (%BIC), and bone density (%BD) for short- (0 to 2 weeks), intermediate- (3 to 4 weeks), and long-term (≥ 5 weeks) healing periods. Results: Of the 527 records identified, 13 studies met the eligibility criteria. Histologically, the OD and GAP groups prevented ischemic necrosis and extensive bone resorption at the bone–implant interface in both the marginal cortical layer and the trabeculae. Faster and increased rates of bone formation, characterized by primary osteons and highly vascularized tissue, took place in OD sites between 1 and 5 weeks of healing. Meta-analyses indicated statistically significant benefits in favor of (1) control vs OD for short-term healing in extraoral sites, with pooled estimates (weighted mean difference) of ITV = 25.35 Ncm, %BIC = 2.10%, and %BD = 26.19%; (2) control vs OD for long-term healing in intraoral sites, with %BD = 11.69%; (3) control vs GAP for intermediate-term healing in extraoral sites, with %BD = 3.03%; and (4) control vs GAP for long-term healing in extraoral sites, with RTV = 5.57 Ncm. Conclusions: Oversized surgical preparation of the implant site does not seem to provide any additional benefit compared to standard or undersized sites regarding quantitative parameters of osseointegration. However, it does minimize marginal bone resorption and yields better-quality bone healing, despite the comparable results among different experimental animal models in the late postoperative period.   Keywords: animal models, dental implants, osseointegration, osteotomy, systematic review

Purpose: The structural and compositional similarities between dentin and alveolar bone formed the basis for utilizing dentin for bone regeneration. Various authors recommended using treated mineralized, partially demineralized, and demineralized dentin grafts over xenografts because of their comparable clinical and radiographic results and lower costs. Therefore, the current study aimed at comparing the effect of untreated mineralized dentin grafts (UMDG) versus xenografts in vertical and horizontal augmentation around dental implants that were immediately placed in the mandibular anterior region. Materials and methods: A total of 56 patients who required immediate dental implant placement in the lower anterior region were randomly allocated to group I (study), where ground dentin was washed with normal saline and placed around the dental implants, and to group II (control), where xenograft was used. The primary implant stability was measured at the time of implant placement. Secondary stability, plaque index (PI), bleeding index (BI), probing depth (PD), and keratinized mucosa width (KMW) were assessed at baseline (time of definitive abutment and temporary crown placement) and then at 3, 6, and 12 months. Pain and the number of analgesics consumed were assessed daily during the first postoperative week. Marginal bone loss (MBL) and radiodensity were assessed radiographically. Results: There were no significant differences between both groups in terms of postoperative pain, the number of analgesic tablets consumed, peri-implant mucositis, or peri-implantitis. Both groups showed comparable results for the PI, BI, and BD. Moreover, there was no statistical difference between both groups with regard to primary implant stability and secondary stability at baseline and 12 months. Group I showed significantly lower secondary stability after loading at 3 and 6 months and significantly greater bone loss and lower bone density before exposure. KMW and MBL after exposure were significantly higher in group I at all time points. Conclusions: Although UMDG showed similar clinical results as xenografts, including primary and secondary implant stability, they had higher resorption rates than xenografts. Therefore, treatment of the dentin graft is required. Thus, the authors do not recommend using untreated mineralized dentin grafts.

Purpose: To present a survival analysis of 133 consecutively placed moderately rough implants, all with a total follow-up of 20 years. Materials and Methods: A total of 133 implants of the same brand placed in 46 patients at the same county clinic in Sweden were followed up prospectively over 20 years and analyzed for survival and bone height, the latter evaluated in periapical radiographs. Results: A total of 7 implants failed, 4 of which were in the same patient. Implant failure was associated with a combination of smoking and bruxism in 5 of the 7 failed cases. A 20-year survival rate of 94.7% was observed. Average marginal bone loss (MBL) at 20 years of follow-up was 0.543 ± 1.193 mm, with 9 implants having more than 2 mm of MBL. A total of 20 patients with 25 implants dropped out of the study; however, if death of the patient is excluded as a dropout reason, only 3 implants in 3 patients were unaccounted for. Conclusions: Good clinical results in the 95% survival range were observed with moderately rough implants over a 20-year follow-up period. 

Purpose: This prospective study evaluated the marginal bone level and periodontal parameters 6 years after placement of a convergent transmucosal neck implant. Materials and Methods: In total, 71 implants were placed in 60 patients. Of these, 52 implants were placed with a flapless technique and with the convergent neck exposed by 1 mm (early and delayed placement), while 19 implants were placed immediately after extraction (immediate placement). At least 3 months after insertion, customized abutments were applied and provisional resin crowns were cemented, while being careful to prevent any tissue compression. After 3 weeks, definitive metal-ceramic crowns were designed with the finish line at the soft tissue level and free from any compression. The implant survival rate at 6 years, marginal bone level changes (ΔMBL, mm), and Pink Esthetic Score (PES) were evaluated. Gingival phenotype was determined before the implant surgeries (thin/thick). A three-level hierarchical model was examined with a random intercept and random slope on follow-up time at the patient level and a random intercept at the implant level. Results: In all, 57 patients with 67 implants reached the 6-year point; 3 patients (5.0%) dropped out. The implant survival rate was 100%. ΔMBL from baseline to 24 months was 0.58 mm (95% CI: 0.48, 0.68), while ΔMBL from 24 to 72 months was 0.33 mm (95% CI: 0.19, 0.47). PES improved steadily from 6 to 48 months (+0.96; 95% CI: 0.71, 1.20), with overall stability at 72 months. No correlation between MBL and PES was observed. A significant association was found between thick gingival phenotype and less MBL variation. Greater implant diameter offered more MBL stability after 3 years but resulted in lower PES values. Conclusions: The use of convergent transmucosal neck implants placed with a flapless transmucosal approach with the crown margin positioned at the gingival level preserved marginal bone and guided gingival morphology for up to 72 months. The gingival phenotype was the parameter that most affected the soft and hard tissues. In the long term, implant placement timing was not related to MBL.

Purpose: To compare the outcomes of immediate and delayed implant placement with bone-level tapered implants. Materials and Methods: In this post-market, multicenter prospective randomized controlled study with a primary endpoint of 1 year, 53 patients were randomized to receive either immediate implant placement (test group) or delayed implant placement (control group). The mean crestal bone level changes from implant loading to 12 months postloading were measured using standardized digital periapical radiographs. Changes in facial plate thickness (as measured on CBCT images), implant success and survival, implant stability, soft tissue changes, patient-centered outcomes, and adverse events were measured to assess outcomes between the test and control treatments at 12 months postloading. Results: Of the original 53 patients, 46 patients completed the study (23 in each group). Mean bone changes from loading to the 12-month follow-up were recorded with no statistically significant difference (P = .950) between the groups. The hypothesis was confirmed that immediate implant placement (test) in extraction sockets produces in similar outcomes as delayed placement (control). The test group was found to be similar to the control group (P = .022) in terms of mean changes in facial plate thickness. Implant survival and success were 95.8% in the test group and 92% in the control group. Stability in the control group was superior at the time of surgery, but there was no difference between the groups at implant loading, producing a nonsignificant P value of .563). Conclusions: This randomized controlled multicenter study showed comparable outcomes 1 year after prosthetic loading in the immediate and delayed implant placement groups. Keywords: complication, dental implant, marginal bone level, prospective study, randomized clinical trial, soft tissue

Purpose: The aims of the study were to evaluate the clinical performance and the complications of combined tooth-/ implant-supported three-unit fixed partial dentures (FPDs) in the posterior mandible. Materials and Methods: A total of 78 partially edentulous patients in the posterior mandible were recruited for the study (n = 26/group). Group 1 served as the control group and received two dental implants to support a three-unit FPD. Groups 2 and 3 were the experimental groups in which one implant was placed in conjunction with support from an adjacent tooth to support a three-unit FPD. Standard implants (≥ 8 mm) were included in Group 2, while short implants (< 8 mm) were included in Group 3. Periapical radiographs were taken for evaluation of crestal bone loss (CBL). Modified plaque index (MPI), bleeding index (BI), and sulcus depth values of the abutment teeth were recorded at the time of FPD delivery, 6 months after FPD delivery, and annually thereafter. Recorded complications included abutment tooth intrusions, cementation failures of the restorations, porcelain chipping/delamination, framework fracture, abutment screw loosening, abutment and abutment screw fracture, and implant fracture. Results: Statistically significant differences were observed between Group 1 (0.06 ± 0.17) and Group 2 (0.18 ± 0.32) and between Group 1 and Group 3 (0.17 ± 0.30) in terms of MPI (P ≤ .05). No difference was observed between Group 2 (0.11 ± 0.34) and Group 3 (0.14 ± 0.36) or between Group 1 (0.04 ± 0.22) and Group 2 in terms of BI. There were statistically significant differences in terms of CBL between Group 1 (0.259 ± 0.05 mm) and Group 3 (0.11 ± 0.03 mm) and between Group 2 (0.03 ± 0.03 mm) and Group 3 (P ≤ .05). The mean abutment tooth sulcus depth was 1.11 ± 0.31 mm for Group 2 and 1.20 ± 0.46 mm for Group 3. Conclusions: Within the limitations of the current study, it was concluded that combined tooth/implant-supported prostheses (CTISPs) are a predictable treatment choice in the posterior mandible. When a CTISP is planned, it is more predictable to use a short implant than a standard-length implant.

Purpose: To evaluate the efficacy of combined therapy of teriparatide and raloxifene on the osseointegration of titanium dental implants in a rabbit model of osteoporotic bone. Materials and Methods: Sixty female rabbits were randomly divided into six groups. The sham ovariectomy group (control) consisted of animals that received no medication. Animals in the ovariectomy group (OVX) underwent ovariectomy and received no medication. The combined group consisted of ovariectomized animals that received combined teriparatide (10 mg/kg) for 12 weeks and raloxifene (10 mg/kg) for 12 weeks. The sequential group (SEQ) consisted of ovariectomized animals that received teriparatide (10 mg/kg) for the first 6 weeks and raloxifene therapy (10 mg/kg) for the following 6 weeks sequentially. The parathormone (PTH) and raloxifene (RAL) groups consisted of ovariectomized animals that received only teriparatide (10 mg/kg) for 12 weeks or raloxifene (10 mg/kg) for 12 weeks, respectively. Dental implants (Bilimplant) were placed in the proximal metaphysis of both tibias in all rabbits. Histomorphometric and microCT studies were performed on the specimens obtained from the right tibia bone. Removal torque (RTQ) and implant stability quotient (ISQ) tests were performed on the specimens obtained from the left tibia bone. The results were compared and evaluated statistically. Results: RTQ analysis revealed a statistically significant difference between the mean values of the combined group (93.01 ± 27.19 Ncm) and the OVX group (49.6 ± 12.5 Ncm) (P = .015). The highest mean T0 (implantation day) value was obtained in the control group (67.1 ± 3.4 Ncm), and the lowest mean value was obtained in the OVX group (61.4 ± 3.8 Ncm). The highest T1 mean (3 months after implantation) was obtained by the combined group (76.6 ± 3.8 Ncm), and the lowest mean was obtained by the OVX group (68.9 ± 6.2 Ncm). Histomorphometric analyses showed that the mean percentage of bone-to-implant contact (BIC%) of the combined group (51.2%) was significantly higher than that of the OVX group (28.6%) (P =.006). In the microCT examinations, it was found that the mean BIC% value of the combined group (41.1%) was significantly higher than that of the OVX group (24.1%) (P < .001). Conclusions: According to the results of the current study, combined therapy of teriparatide and raloxifene improves the BIC and osseointegration of titanium dental implants in osteoporotic bone compared with sequential or independent therapy with these agents. Keywords: dental implants, osseointegration, osteoporosis, raloxifene, teriparatide

Purpose: To evaluate the effect of interleukin-6 (IL-6) inhibitor (tocilizumab) on bacterial infection–associated bone resorption around implants during osseointegration in rabbits. Materials and Methods: At total of 24 male, 9-monthold New Zealand white rabbits were included, and their two mandibular anterior teeth were extracted. Three months after extraction, 24 one-piece Dentium implants (Ø 2.5 mm, intraosseous length of 12 mm) were inserted in the anterior mandible, and the rabbits were divided into four groups (n = 6 per group). Different treatment methods were used in each group: blank control group (BC); only silk ligation (negative control [NC]); silk ligation and injection with minocycline hydrochloride ointment (positive control [PC]); and silk ligation and injection with tocilizumab at 8 mg/kg via the auricle vein (experimental [EP]). Eight weeks later, the animals were sacrificed, and samples were collected and then analyzed using microcomputed tomography (microCT) scanning, immunohistochemical analysis, and histologic analysis. Results: From the microCT measurement, the ratio of the bone volume to the total volume (BV/TV) in the EP group was 67.00% ± 2.72%, which was higher than that in the other three groups (58.85% ± 2.43% in the BC group, 55.72% ± 2.48% in the PC group, and 36.52% ± 3.02% in the NC group). From immunohistochemical analysis, the expression of IL-6 was found to be higher in the NC group than in the BC, PC, and EP groups, but there was no statistical difference between these three groups. Furthermore, the RANKL (receptor activator of nuclear factor-κB ligand) expression was the lowest in the EP group, followed by the BC group, the PC group, and the NC group, which had the highest expression; there was no difference between the NC and PC groups. Upon histologic analysis, significant new bone was found on the implant surfaces in the EP group, sparse and less new bone could be seen in the BC and PC groups, and the most serious bone resorption occurred in the NC group. Conclusions: Tocilizumab, an inhibitor of IL-6, has a certain effect in preventing bone loss around implants caused by bacterial infection during the osseointegration period. Keywords: bone resorption, IL-6, peri-implantitis, rabbits, tocilizumab

Purpose: Dental implants are a common treatment method after tooth loss, the accuracy of which directly affects efficacy and stability. Through a network meta-analysis, this study compared the accuracy of different modalities of implant placement: dynamic navigation (DN), fully guided static navigation (FG), partially guided static navigation (PG), and free handed (FH). Materials and Methods: This study followed the Preferred Reporting Items for Meta-Analyses (PRISMA) guidelines. An electronic literature search was conducted on October 2, 2022. The comparison of implant accuracy in all included randomized controlled trials (RCTs) conformed to at least one of the following: deviation at the implant crown, deviation at the apical portion of the implant, or angular deviation of the implant. Results: Twenty-six articles were included for the qualitative analysis (17 RCTs, 3 prospective studies, and 6 retrospective studies), and the 17 RCTs were included for network meta-analysis. The data included in this study had high consistency, and the funnel plot showed that the articles had low publication bias. Compared to FH, FG and DN had higher accuracy for coronal deviation (P < .05), and FG, DN, and PG had higher accuracy for apical and angular deviations (P < .05). According to the SUCRA (surface under the cumulative ranking curves) value, FG had the highest accuracy for coronal deviation, while DN had the highest accuracy in apical and angular deviations. Conclusions: According to the present results, the accuracies for DN, FG, and PG were higher than those for FH. DN showed the highest accuracy in terms of apical deviation and angular deviation. FG had the best control over the coronal deviation. There was no statistical difference between DN and FG in terms of accuracy. Given the limitations of the current study, further validation is required.

Purpose: To determine the relationship between bone loss that occurs during the peri-implantitis process and variations in implant stability using resonance frequency analysis (RFA) measurement methods. Materials and Methods: Forty selftapping implants were placed in cow ribs, and study scenarios were established according to the affected implant side and bone loss depth (n = 10 implants per group): Case 1 = bone loss on one side (vestibular); Case 2 = bone loss on two opposite sides (buccal and lingual); Case 3 = bone loss on two adjacent sides (buccal and mesial); and Case 4 = foursided bone loss (circumferential). For each group of 10 implants, first a bone loss of 0 mm was evaluated, then 4-mm defects (simulating 1/3 of bone loss) were created and evaluated, and finally 8-mm defects (simulating 2/3 of bone loss) were created and evaluated. Osteotomy measurements were made with a periodontal probe. For each implant, RFA was measured by the same operator using the Beacon system (Osstell). Results: The initial implant stability quotient (ISQ) values of the 40 implants exceeded 70, reflecting an average of 73 in the buccolingual (VL) and 74.8 in the mesiodistal (MD) directions. ISQ measurements in the 10 implants in which bone dehiscence was performed on the vestibular aspect reflected a decrease in ISQ values as bone loss increased. When generating bone loss in two opposite sides (buccal and lingual), a greater decrease in ISQ values was observed when 2/3 of the implant were affected. The average VL ISQ measurement was less than 70 when at sites with 2/3 of bone loss. Conclusions: When bone loss occurs on only one side of the implant, the ISQ values decrease, but the implant maintains good stability. The same occurs when two opposite sides of the implant are affected, as the unaffected side has the least decrease in ISQ value. Keywords: ISQ, peri-implant defect, peri-implantitis

Background: Platelet-rich fibrin (PRF) is used to prepare “sticky bone” by combining it with bone graft material. The present study investigated the ability of different bone grafts to absorb growth factors from the PRF and release them over time. Materials and Methods: Human blood was collected from 10 healthy volunteers for liquid PRF preparation. Bovine bone, allograft (mineralized and demineralized), and synthetic bone were each mixed with the PRF to prepare a sticky bone. All sticky bone samples were incubated for up to 4 days. The absorption and release pattern kinetics of two selective growth factors within the PRF—platelet-derived growth factor (PDGF) and bone morphogenetic protein-2 (BMP-2)—were quantified with immunofluorescence staining and enzyme-linked immunoassay (ELISA) testing. Results: All bone graft materials adsorbed the examined growth factors from the PRF. β-TCP showed the highest adsorption levels, followed by the xenograft, and the allografts showed the lowest adsorption levels. Furthermore, PDGF showed a fast-release pattern from the grafts, whereas BMP-2 was released at a later stage. Similar to the adsorption pattern, the β-TCP and xenograft were better able to sustain the release of the PRF growth factors from the graft than the allografts. Conclusions: The adsorption of PDGF and BMP-2 differ between graft materials, with superior results for β-TCP, followed by xenograft, then allograft materials.  Keywords: growth factors, platelet-rich fibrin, sticky bone

Purpose: Despite the high clinical accuracy of dynamic navigation, inherent sources of error exist. The purpose of this study was to improve the accuracy of dynamic-navigated surgical procedures in the edentulous maxilla by identifying the optimal configuration of intraoral points that results in the lowest possible registration error for direct clinical implementation. Materials and Methods: Six different four-area configurations (left and right sides; n = 12) were tested by three operators against two negative controls (left and right sides) and one positive control (three-area and eight-area configurations, respectively) using a skull model. The two dynamic navigation systems (X-Guide and Navident) and the two registration methods (bone surface tracing and fiducial markers) produced four registration groups: XG tracing, ND tracing, XG fiducial, and ND fiducial. The accuracy of the registration was checked at the frontal process of the zygoma. Intra- and interoperator reliabilities were reported for each registration group. Multiple comparisons were conducted to find the best configuration with the minimum registration error. Results: Ranking revealed one configuration in the tracing groups (Conf.3) and two configurations in the fiducial groups (Conf.3 and Conf.5) that had the best accuracy. When the inferior surfaces of the zygomatic buttress were excluded, fiducial registration produced better accuracy with both systems (P = .006 and < .0001). However, bilaterally tracing 1-cm areas at these surfaces resulted in similar registration accuracy to placing fiducial markers there (P = .430 and .237). Navident performed generally better (P = .049, .001, and .002), but the values had a wider margin of uncertainty. Changing the distribution of the four tracing areas or fiducial markers had a less pronounced effect with the X-Guide than with the Navident system. Conclusions: For surgery in the edentulous maxilla, four fiducial markers placed according to Conf.3 or Conf.5 resulted in the lowest registration error. Where implants are being placed bilaterally, an additional two sites may further reduce the error. For bilateral zygomatic implant placement, it is optimal to place two fiducial markers on the inferior surfaces of the maxillary tuberosities, two on their buccal surfaces, and another two on the anterior labial surface of the alveolar bone. Utilizing the inferior zygomatic buttress is recommended over the inferior maxillary tuberosities in other types of maxillary surgeries. Keywords: dynamic navigation, fiducial, implants, maxilla, registration, tracing

Purpose: To determine the vertical space required for implant osteotomy preparation when utilizing a CAD/CAM fully guided surgical template. Materials and Methods: A total of 14 surgical osteotomy drills (individual and sequential drills) were collected and measured individually using a digital caliper, as well as the total length when the drills were positioned in a surgical handpiece. The height of the surgical guide sleeves and the offset of 14 implant systems in the market were also collected. Results: The vertical dimension of the drills included in this study ranged from 28.2 to 46.3 mm. When these drills were inserted into the handpiece, the total length ranged from 30.0 to 49.5 mm. The height of the surgical guide sleeve and the offset required for the guide had a range of 3.2 to 7.0 mm and 5.0 to 13.5 mm, respectively. This dimension resulted in the total vertical space required for CAD/CAM fully guided surgical templates for each implant system, which ranged from 30.0 to 58.5 mm. Conclusions: Limited mouth opening can pose challenges and limitations in both guided and nonguided dental implant surgery. It can affect the accessibility of surgical implant placement and may result in increased patient discomfort, surgical implant positioning errors, and postoperative complications. Clinicians should determine the patient’s mouth opening capabilities during the treatment planning phase prior to deciding on the appropriate implant system to be used and the implant placement technique.

Purpose: To compare crestal bone loss (CBL) 12 weeks after immediate implant placement in the mandible of a canine model between titanium (Ti) implants with a conventional etched surface (SLA type) and Ti implants coated with chitosan (Cht). Materials and Methods: A total of 48 Ti-Al16-V4 implants (24 experimental and 24 control) with an internally connected tapered screw design were randomly placed into six canine maxillae, 4 per hemiarch. The experimental implants were coated with Cht by immersion and sterilized with ethylene oxide. Primary stability was measured using the Osstell device, and no grafting materials were used. The 3D microCT measurements included crestal bone volume (CBV) and bone volume change in crestal area (ΔCBV), which were considered outcome measures. Parallelized periapical radiographs were also taken at the time of implant placement and after 12 weeks to assess changes in crestal bone levels. Results: In terms of volumetric changes, it was observed that the experimental group showed better results than the control group (P = .049 and P = .303, respectively). Regarding the implant sites, no significant differences were found between the experimental implant sites and control sites. The implants placed at P4 level in the experimental group obtained the best result (P = .041). The linear data obtained from the periapical radiographs indicated greater bone loss in the control group compared to the experimental group (3.2 ± 0.45 mm and 2.75 ± 0.55 mm, respectively). Conclusions: Despite the better results obtained for the Cht-coated surface group, further preclinical studies are necessary to confirm these results. Keywords: chitosan coating, crestal bone, dental implant, microCT evaluation, radiographic evaluation

Purpose: To compare the inflammatory responses of peripheral blood mononuclear cells (PBMCs) subjected to titanium (Ti) and/or zirconia (Zr) particles while growing on Ti or Zr discs. Materials and Methods: In total, 240 discs were fabricated at a size of 2 mm in height and 5 mm in diameter. Of the 240 discs, 120 discs were made of Ti (commercially pure [CP] grade 4), and 120 discs were made of Zr (3 mol% yttria-stabilized zirconia polycrystals [3Y-TZP]). The PBMCs were cultured on the two-disc materials, and particles with a size up to 20 mm Ti (99.5% Ti) and 0.1 to 0.2 mm Zr (3Y-TZP) were added to the cultures. The concentration levels of inflammatory cytokines in culture supernatants were measured through Bio-Plex assay (Bio-Rad Laboratories), and light microscopic analysis was performed to detect cell attachment and characterize particle shape and cell-particle interaction. Results: The inflammatory responses of PBMCs were generally higher when cells were cultured on a Ti surface compared to a Zr surface. In addition, higher cytokine levels were seen when cells were cultured in the presence of Ti particles compared to Zr particles when no discs were used. However, there were only significantly increased levels for three cytokines (MCP-1, IFN-γ, and TNF-α) when particles were added to Ti discs. Higher release of neutrophil extracellular traps (NETs) from neutrophils were seen in presence of Zr particles compared to Ti particles. A reduction in cell death was observed in the presence of Zr particles compared to Ti particles and unstimulated control samples. Conclusions: The type of growth material and presence of particle affects PBMCs in vitro. Cells seeded on Ti discs and together with Ti particles generated higher levels of inflammatory cytokines compared to the Zr counterparts. Keywords: dental implant, PBMCs, titanium, wear particle, zirconia

Purpose: To introduce a new method for labiopalatal positioning and angulation of immediately placed dental implants in the anterior maxilla with relation to the type of abutment used (straight/angled abutment). Materials and Methods: CBCT scans from the database of a private practice were searched for patients who received immediate implants in the anterior maxilla. After superimposition of the initial and postoperative scans, the incisor root angle (IRA), incisor implant angle (IIA), and the difference between these angles were measured. An assessment was then made about whether the implant position would be within the safe angle or not. Age, sex, tooth/implant site, and type of prosthetic abutment (straight/angled) were retrieved from the patients’ records. Results: A total of 74 patients with 95 immediate implants altogether were selected for analysis. In regard to the type of abutment, 76 (80%) were straight, and 19 abutments (20%) were angled. Regardless of abutment type, 72 implants (75.8%) were placed within the safe angle, while 23 implants (24.2%) were placed outside it. All 19 implants with angled abutments were placed outside the safe angle. There were statistically significant associations between placement within the safe angle and type of abutment (P < .001; OR = 19), IRA (P < .001; effect size = 0.904), difference between IIA and IRA (P < .001; effect size = 1.209), and sex (P < .001; OR = 2.995). There was no statistically significant association between placement within the safe angle and IIA (P = .757, effect size = 0.063), site (P = .200; effect size = 0.184 ), or age (P = .387; effect size = 0.208). There was a statistically significant association between the type of abutment and the IRA (P = .001; effect size = 0.762) as well as the difference between IIA and IRA (P < .001; effect size = 1.056). Conclusions: The safe angle concept can be used as a reliable planning tool to determine the correct implant positioning for immediate implant placement in the anterior maxilla. Applying the safe angle concept will reduce the need for angled abutments for prosthetic correction. Keywords: anterior maxilla, CBCT, immediate implant placement, safe angle concept