International Journal of Computerized Dentistry, 01/2012

The use of computer-aided surgical systems for dental implant bed preparation and implant placement results in an average precision within 1 mm of implant position and within 5 degrees of deviation for implant inclination. The accuracy of axis and implant position is significantly more precise with the three-dimensional surgical guide than with the free-hand method. The three-dimensional assessment of the restorative goal (radiopaque simulation of prosthesis with scanning template) allows virtual planning of implants, which enables optimized positioning of implants with surgical guide templates in oral surgery. If there is a clear indication for three-dimensional diagnostics, it should always be checked whether the data can be used as planning data for a surgical guide template, otherwise the chance for guided surgery remains unused. Since uncertainties still exist despite the use of a drilling template, it is recommended that the minimum safety distance from adjacent structures be maintained. The successful use of surgical guide templates requires comprehensive knowledge of and experience in using three-dimensional information for the virtual planning of implant position. Palabras clave: dental implantation, image processing, computer-assisted, three-dimensional, treatment planning

Purpose: The aim of this in-vitro study was to evaluate the accuracy of inLab and Cerec Connect software in simulating the maximum intercuspal contacts in comparison to the real situation on the respective gypsum casts. Materials and Methods: Ten pairs of maxillary and mandibular casts were mounted in articulators in maximum intercuspal position. The contacts of the gypsum casts were marked and digital photographs of the mandibular casts were taken. Digital impressions of arches were made using two different software packages; inLab (Version 3.83) and Cerec Connect (Version 3.83) using the Cerec Acquisition Center. The intercuspal position of the teeth was captured by buccal images. Screenshots of the virtual casts showing the occlusal contacts were saved. The digital photographs of the contacts of the cast and the screenshots of the occlusal contacts were superimposed using an image processing program. The number of contacts of the virtual mandibular models that were identical with the contacts of the gypsum casts were determined and calculated as percentages in relation to the gypsum cast contacts, which were set as 100%. The null hypothesis tested was that the Cerec connect software delivers contacts that are closer to the real situation than contacts created with the inLab software. Results: Cerec Connect showed a median percentage of 41.6% and Inlab a median percentage of 31.9%. The Wilcoxon test revealed statistically significant differences between the inLab software and Cerec Connect. Especially at the contra-lateral side of that side where the virtual buccal registration was done, the contacts showed the greatest deviations from the original. Conclusion: Cerec Connect more precisely virtually simulated the real contacts than did inLab when scanning fullarch dentitions. Palabras clave: inLab, Cerec Connect, buccal image method, maximum intercuspal position, occlusal contact, virtual occlusal contact

Objective: To evaluate the implementation of quality assurance requirements for digital dental radiography in routine clinical practice. The results should be discussed by radiation protection authorities in the context of the relevant legal requirements and current debates on radiation protection. Materials and methods: Two hundred digital dental radiographs were randomly selected from the digital database of the Department of Dentistry's Dental and Maxillofacial Surgery Clinic, Ulm University, and evaluated for various aspects of image quality and compliance with radiographic documentation requirements. The dental films were prepared by different radiology assistants (RAs) using one of two digital intraoral radiographic systems: Sirona Heliodent DS, 60 kV, focal spot size: 0.7 mm (group A) or KaVo Gendex 765 DC, 65 kV, focal spot size: 0.4 mm (group B). Results: Radiographic justification was documented in 70.5% of cases, and the radiographic findings in 76.5%. Both variables were documented in the patient records as well as in the software in 14% of cases. Clinical documentation of the required information (name of the responsible dentist and radiology assistant, date, patient name, department, tube voltage, tube current, exposure time, type of radiograph, film size, department and serial number of the dental radiograph) was 100% complete in all cases. Moreover, the department certified according to DIN ISO 9001:2008 specifications demonstrated complete clinical documentation of radiographic justifications and radiographic findings. The entire dentition was visible on 83% of the digital films. The visible area corresponded to the target region on 85.7% of the digital dental radiographs. Seven to 8.5% of the images were classified as "hypometric" or "hypermetric". Conclusions: This study indicates that improvements in radiology training and continuing education for dentists and dental staff performing x-ray examinations are needed to ensure consistent high quality of digital dental radiography. Implementation of internal radiological quality assurance programs, as required by public law in Germany since 2010 (SGB V), would appear prudent. Palabras clave: Quality management, quality assurance, digital radiography, dental radiograph, radiation protection, justification, dose, dose reduction

Hemisection of mandibular molars is a viable method of preserving periodontally or endodontically compromised teeth or roots. This paper describes a simple chairside CAD/CAM method of fabricating a cantilever crown for a hemisected molar. The technique is illustrated by a clinical case, which was treated according to this protocol and was followedup over 2.5 years. Given careful patient selection and strict recall intervals, the introduced method represents a conservative and cost-effective treatment modality for highquality ceramic reconstructions of root-resected teeth. In addition, other treatment options such as implantation or prosthesis, which would represent therapeutic and prosthetic endpoints, can be postponed. Palabras clave: CAD/CAM, Cerec, hemisection, mandibular molar, reconstruction, periodontitis