Purpose: The purpose of the current study was to investigate the shear bond strength of composite resin in five different ceramic repair systems for three different ceramic materials. Materials and Methods: 225 monolithic zirconia (Zr) and lithium disilicate (LDS) and cobalt chromium (CoCr) specimens with feldspathic porcelain (FP) veneer were fabricated (N=75 per material). The specimens underwent thermo-cycling and were randomly divided into five groups for the following intra-oral repair systems (n=15): 1) Clearfil Ceramic Primer Plus, Kuraray Noritake, Japan; 2) Ibond Intraoral Repair Kit, Kulzer, Germany; 3) VOCO Cimara, VOCO GmbH Germany; 4) Ivoclar Vivadent, Ceramic Repair System Kit, IvoclarVivadent, Liechtenstein; 5) Ultradent Porcelain Repair Kit, Ultradent Products Inc, USA. After surface conditioning, composite was applied using a cylindrical mold and a second round of thermocycling was performed. Each specimen was then subjected to shear load until failure. Microshear bond strength was compared using analysis of variance (one-way ANOVA, Tukey´s test, a <0.05). Results: Type of porcelain repair kit significantly affected the shear bond strength. For Zr, the repair systems from Kulzer and VOCO had significantly higher shear bond strength than the other systems (p<0.001) without significant difference between Kulzer and VOCO. For the LDS and CoCr with FP, hydrofluoric acid had the highest shear bond strength (p<0.001). Conclusion: For zirconia, a 10-Methacryloyloxydecyl dihydrogen phosphate (10-MDP) system should be used. The results also suggest that a cleaning bur may be beneficial. For glass-based ceramics and feldspathic porcelain, etching with hydrofluoric acid remains the product of choice.