Pages 397-402, Language: EnglishZuolo / WaltonNickel-titanium instruments purportedly resist deformation and loss of sharpness better than do stainless steel instruments but may be more susceptible to breakage. The processes of wear and breakage of nickel-titanium and stainless steel instruments were examined. Sixty files of five types (12 each) and three manufacturers were used. All were used repeatedly in curved canals until failure or for a maximu of 22 minutes. Each instrument was examined with scanning electron microscopy both new (control) and at s paced intervals for evidence of wear and fatigue. All new instruments were of good quality. Stainless steel instruments tended to wear the most rapidly, and next were nickel-titanium rotary instruments; the most resistant to wear were nickel-titanium hand instruments. There were few instrument separations. In general, nickl-titanium (particularly hand) instruments resisted deterioration better than did stainless steel. Nickel-titanium rotary instruments (2 of 12) had the most breakage.
